Do you have a question?
Straight answers about Isigenere’s technology, applications, projects and services.
All (46)
Technology (27)
Applications (10)
Projects (28)
Services (17)
General (14)
What is the system’s service life and what warranty do you offer?
Technology, Services
The estimated service life of the Isifloating floating solar system exceeds 25 years. The standard product warranty is 10 years and can be extended. To activate it, the installation must successfully pass the Isigenere quality control process. To keep it valid, annual maintenance must be carried out and documented in accordance with our Operation and Maintenance Manual. Meeting these conditions helps preserve the system’s performance and supports reaching its estimated service life, provided it operates within the expected design conditions.
When does a floating solar plant make sense compared with a ground-mounted plant?
General, Applications, Projects
A floating solar plant adds the most value when available land is scarce, does not allow solar installation or has a productive use you want to keep; when water is a key asset you want to protect and conserve, limiting evaporation (more than 80% on the covered surface) and algae growth; or when there is a nearby grid connection, as at a hydropower plant.
In terms of cost, although floating solar is usually 15–30% more expensive in CAPEX, we recommend including in the assessment the benefits over the asset’s service life, such as the opportunity cost of land, the cost of evaporated water or reduced chemical use. These are quantifiable advantages from commissioning onward that improve the viability of the floating solar project.
Is your technology bankable?
General, Technology, Projects
Yes, our technology is bankable. We support every project with the documentation required by independent engineers, lenders and investors: calculation reports, structural reports and asset life analyses, with traceability to standards (Eurocode, recommended marine practices and DNV guidelines). Our track record since 2008, with more than 100 projects and plants in continuous operation since 2009, backs the system’s durability.
Why choose Isigenere over other floating systems?
General, Technology, Services
Because at Isigenere we combine our own patented technology since 2008, an exclusive focus on floating solar and real experience in more than 100 projects in 16 countries.
Because we custom-design each floating system, consolidating as a single assembly the floating structure, the anchoring and mooring system, and the support for electrical components. Calculated in accordance with Eurocode, recommended marine practices and DNV guidelines.
Because we back every proposed solution with clear documentation, so you can make informed and accurate decisions.
Because we work with your team, your engineering firm or your EPC with a single shared goal: that the system operates as designed throughout its service life. Without competing, since we are neither installers nor project developers.
Because Isifloating has proven to be the safest and most reliable system on the market across more than 100 projects developed internationally.
What is Isigenere and who does it work with?
General, Services
We are a Spanish company specializing in the engineering, manufacturing and supply of floating solar systems, applying our Isifloating technology: proprietary, patented and a world pioneer since 2008. We are dedicated exclusively to floating solar.
At Isigenere we work with owners, users and managers of water bodies; power generation and utility companies; companies in the agricultural, livestock, mining, aquaculture, industrial and technology sectors; and full or partial developers of floating solar projects.
How do you design the anchoring and mooring system?
Technology, Projects, Services
At Isigenere we custom-design the anchoring and mooring system together with the floating structure, since they are interdependent decisions. We start from the actual site conditions taken from the studies (bathymetry, geotechnics, hydrodynamics and water level variation) and calculate in accordance with Eurocode (or equivalent standards), recommended marine practices and DNV guidelines.
For each project we define the required shore anchors (driven steel profiles, screw anchors, plates, chemical anchors) and/or bottom anchors (piles, plates, concrete deadweights, etc.). Our reference solution for sites with large level variations and complex conditions is SeaFlex elastic mooring. This system allows the plant to adapt to water level and wind, and helps dampen the loads transmitted to the structure and the anchor points.
Does Isigenere install the floating solar plant?
Services, Projects
The Isifloating system is installed by your EPC or installer. Our approach is to support you as a technical partner throughout every phase of the project, from design and throughout the asset’s service life. We design, manufacture and supply the floating system, train the installers and support you during construction, working with your engineering firm, EPC and installer, without taking on construction management or installation. Once construction is complete, we inspect the installation and issue the report that activates the warranty.
Can I install a plant on my irrigation pond without affecting irrigation?
Applications, Technology
Yes. Installing an FPV plant on your irrigation pond turns it into an energy asset while keeping its original function, generating electricity to cover the pumping needs for irrigation. It also brings other water conservation benefits, as it reduces evaporation and minimizes the growth of microorganisms.
On lined ponds we use shore anchors on the crest that preserve the geomembrane, and long-travel mooring lines for seasonal level variations. One example is our project for Campo de Cartagena, which, with the energy generated, covers 85% of the consumption of the pumping station that supplies some 5,000 hectares.
What happens when the water level drops or the water body is emptied?
Technology, Applications, Projects
We take water level variation into account at the engineering stage: we calculate based on the minimum water surface expected over the FPV plant’s service life, sizing the mooring lines to follow every level variation. For example, on ponds we design the floating structure so that it can rest safely on the bottom if the pond is emptied due to drought, cleaning or liner repair. The underside of the floats has rounded corners with no sharp edges, preventing damage to the geomembrane. At our first plant on an irrigation pond, in operation since 2009, the floats have rested on the slopes during level drawdowns without damaging the liner.
Is your system compatible with the specific water chemistry of my industrial pond?
Applications, Technology
Yes. The HDPE material we use for our floats performs well across a pH range of 1.5 to 14. For each industrial project we review a water analysis to verify the compatibility of all components and, where necessary, define specific replacement intervals for elements such as mooring lines. We have experience with industrial process water, slurry ponds and salt water. The compatibility of the electrical equipment must be validated by your EPC using the same water analysis.
What is Isifloating technology?
Technology, General
Isifloating technology, developed, proven and patented by Isigenere, is the most reliable technical solution for turning water bodies into suitable and safe sites for solar plants. It integrates three systems designed specifically for water, working together as a single engineering element: the floating structure, the anchoring and mooring system, and the electrical equipment support. Since 2008 we have evolved our technology (R&D) up to the current version (Isifloating 6.0), incorporating what we have learned from real projects and the advances developed in our R&D&I department.
How much does a project with Isifloating technology cost?
Projects, Services, General
Each floating solar system is custom-designed, so its cost depends on the power, the photovoltaic module, the conditions of the water body (wind, waves, level variation, bathymetry and geotechnics), the anchoring and mooring system, and logistics to the site. For a specific figure, request our free Initial Feasibility Study: it includes an approximate budget.
On what types of water bodies can an FPV plant be installed?
Applications
Our Isifloating technology adapts to four main types of water bodies: man-made ponds for agricultural or industrial use, with variable water level and no significant waves; reservoirs and lakes, with greater depth, fetch-generated waves or significant level variations; quarries and mining sites, with rocky slopes and irregular bottoms; and special water bodies, such as aquaculture channels, sheltered nearshore sites or ponds with industrial process water. Each environment requires a specific technical response, which we define in the initial analysis.
What are the phases of a project with Isigenere?
Projects, Services
At Isigenere we support you from the start and throughout the asset’s service life, with four key phases in the development of the floating solar project: Analysis, Design, Manufacturing and supply, and Training with technical support.
We begin by analyzing the water body, the available reports and your objectives in order to develop the exact configuration of the floating solar system using our Isifloating technology. Once the design is approved, we manufacture and supply it within the agreed time frame at the installation site. We complete the project development by training the installers and providing technical support during plant construction, which we continue to provide throughout its service life.
What does the Initial Feasibility Study include and what does it cost?
Services, Projects
The Initial Feasibility Study carried out by Isigenere is free of charge and with no obligation. It is prepared by our engineers specialized in floating solar and includes: the recommended power for your water body, the initial layout of the floating solar system, an approximate budget and a preliminary business case analysis showing the payback period, with a focus on self-consumption. We respond within 48 hours. All we need are your details and the GPS coordinates of the water body. We treat your information confidentially and, if needed, sign a non-disclosure agreement (NDA) before sharing detailed information.
What maintenance is required over the project’s 25-year service life?
Services, Projects, Technology
Maintenance of an FPV plant with Isifloating technology is minimal and follows the same logic as a rooftop plant: any point can be reached on foot via the perimeter and internal walkways, which are very stable thanks to their 250 kg load capacity. The main tasks are visual inspection of the components and checking anchor positions and mooring line tension after the first year; the ropes may need replacing once or twice over the entire service life. At Isigenere we provide an O&M Manual with tasks and intervals per component, tailored to your project, and ongoing technical support with responses within 48 hours.
How does the system respond to wind and waves?
Technology, Projects
Our aerodynamic 5° design reduces the effect of wind load pressure on the floating system, and the flexible, semi-rigid connectors allow the platform to follow the waves and dissipate stresses. We have obtained good results in full-scale tests with large waves carried out by IHCantabria (Environmental Hydraulics Institute of Cantabria).
We define the needs of each project using actual site data. When required, we add perimeter breakwaters sized according to the fetch, the prevailing wind and the plant orientation. This is the case of the Alqueva project, in operation since 2023 on a reservoir with waves of almost 2 meters.
How are the modules cleaned and what about birds?
Projects, Technology, Applications
Photovoltaic modules can be cleaned manually or with certified cleaning robots, which use the nearby water and whose weight is supported by our system thanks to its high buoyancy. Birds coexist with floating solar plants and usually perch on the perimeter. When bird presence is high, we widen the perimeter strip of secondary floats so that birds perch there rather than on the modules, and we adjust the recommended cleaning frequency. In high-density cases we evaluate, depending on local fauna, deterrent systems or nesting islands, which we have already incorporated successfully in some projects.
What materials do you use and how do you manufacture the floating structure system?
Technology, Projects
We produce the floats by injection molding in virgin HDPE with additives against UV radiation and oxidation. Injection molding ensures 100% consistent wall thickness with no residual stresses. The connectors are glass-fiber-reinforced PA6, the bolts are corrosion-resistant with no metal contact with the water, and the clamps are 6063 T6 aluminum. We manufacture on three in-house production lines in Europe and the USA, with a management system certified to ISO 9001 and quality traceability per project.
What is the delivery lead time and how do you organize logistics?
Services, Projects
At Isigenere we specify the delivery lead time in the contract. After signing, the first material delivery usually takes place within 6 to 8 weeks (time to start manufacturing and progress the engineering). Subsequent shipments are periodic and synchronized with the assembly rate to optimize storage space on site. The stackable, nestable design of Isifloating reduces storage and transport volume to 3 to 4 times less than other systems: 1 MW in standard configuration is transported in about 6 trailers or 7 × 40' HC containers. We offer flexibility in Incoterms (International Commercial Terms).
How long does it take to install a plant and what equipment is needed?
Projects, Technology
The Isifloating system is designed for simple, productive assembly: the modules are fixed to the floats and connected on land, and the assembled sub-areas slide into the water without cranes or heavy machinery. After the learning curve, on average 6 people can install 1 MW (with 650 Wp modules) in about 11 working days. This time frame includes assembly of the floating solar structure, module installation, string connection and launching the platform into the water. This rate does not include the additional time needed to install the rest of the electrical system (inverters, cable evacuation route, etc.) or to build the anchoring and mooring system. To optimize the project construction schedule, several of these activities can be planned in parallel.
Can the system withstand snow and frost?
Technology, Applications
Yes, our system is designed for the snow load at the FPV plant site. The double float per module provides a service buoyancy of 0.54–0.57 kN/m² (standard configuration), and the Isifloating 6.0 version includes Snow floats for areas with high snow loads, where we size the buoyancy according to the load required at the site. In freezing conditions, the truncated-pyramid shape of the float helps it rise above the ice, and the HDPE we use has an embrittlement temperature of −75 °C.
Is the system sustainable and recyclable?
General, Technology
Yes, we manufacture the floats from HDPE and they are 100% recyclable, as certified by an external materials institute. Our stackable design reduces storage and transport volume, as well as the associated emissions. In addition, for the Alqueva plant we developed with Corticeira Amorim our own formulation combining recycled HDPE with cork compounds, which reduced platform weight by 15% and the project’s CO₂ footprint by around 30%.
Do you handle project permits?
Services, Projects
Permitting is the responsibility of the project developer, who receives our support through the technical documentation required, such as the reports needed to apply for permits from river basin authorities, basin agencies and municipalities. We have experience with projects developed in 16 countries.
What can I use the energy from a floating solar plant for?
Applications, Projects
There are three main applications: self-consumption, when you produce energy for your own operations, supplying industrial processes or pumping at the point of demand; grid-connected, when you generate energy at large scale to sell it at a profit; and hybrid, when it is combined with other energy facilities to optimize existing assets, as in the case of Alqueva (EDP), a 5 MW floating solar plant that operates hybridized with the hydropower plant and its storage system, producing ~7.5 GWh/year.
Will I be able to get spare parts throughout the plant’s service life?
Services, Technology
At Isigenere we manufacture the system components on our own production lines, which allows us to supply the spare parts your plant needs during operation. Our offer can include a batch of spare parts to keep on site with the most common replacement components. The O&M Manual defines which elements to inspect and how often; for example, mooring ropes may need replacing once or twice over the asset’s service life.
Does a floating solar plant produce more energy than a ground-mounted one?
Technology, General
Yes. How much more depends on the location of the FPV plant and its conditions. What has been demonstrated is that water has a cooling effect on the modules, which improves their performance compared with an equivalent ground-mounted installation. At Isigenere we calculate it with conservative criteria adjusted to the project site: we simulate the plant with the climate data for its location and apply the performance gain corresponding to that climate. This way, the production figures we present can be defended before engineering firms and lenders.
Can I expand the plant in the future?
Technology, Projects
Yes. The Isifloating system is modular and scalable; in large projects it is organized into independent islands, which makes phased growth easier. This is how it was built at the Comunidad de Regantes de Mérida, where 3 phases have been completed in recent years on the same pond. If you are considering one or more expansions, we recommend stating this from the start of the development of the first FPV plant, as we will take it into account in the layout, the anchoring and mooring system, and the cable evacuation route. If the expansion arises once the plant is already in place, we will also assess with you the technical feasibility of new expansions during operation.
Can I visit an operating plant with Isifloating technology?
Services, General, Projects
Yes. At Isigenere we organize visits to operating plants with Isifloating technology, subject to authorization from their owners and their visitor protocols. Our clients and partners value this highly as a way to see our advantages and the system’s behavior under real conditions: access and movement along the walkways, and maintenance tasks. For this reason, we include a visit to an operating plant in our installer training program. If you would like us to organize a visit, contact our technical team and indicate the type of water body you are interested in so that we can suggest the nearest reference.
What components make up the Isifloating floating solar system?
Technology
The Isifloating floating solar system consists of three systems that we design as a single assembly: the floating structure system, the anchoring and mooring system, and the electrical equipment support system.
The floating structure consists of main floats, which support the modules attached with fixing clamps; secondary floats, which form the main walkways where we place the cable trays and inverters; flexible, semi-rigid connectors that absorb and dissipate loads; and patented perimeter breakwaters, required in projects on reservoirs and large water bodies, made of ultra high-performance concrete (UHPC).
What technical documentation do you deliver?
Services, Projects
At Isigenere we calculate and document each project clearly so that you and your technical team can validate the deliverables: general layout drawings, construction details, electrical string configuration, georeferenced anchor locations, mooring line definition with rope lengths, recommended assembly area, and mechanical calculation report for the floating structure system and the anchoring and mooring system. We also deliver the assembly manual and the operation and maintenance manual.
What effect does the plant have on water quality and aquatic life?
Applications, General
According to the tests and certifications of our Isifloating system, no negative effects on water quality have been observed or recorded. Partial coverage of the surface reduces evaporation and limits algae growth by reducing the solar radiation that penetrates the water.
The interaction with aquatic life depends on the percentage of surface covered, which we define specifically for each project based on the characteristics of the water body and its environmental studies. If you wish, we can share a summary of the main research available on this topic.
What is floating solar energy (FPV)?
General, Technology
Floating solar energy, or FPV (floating photovoltaics), is the branch of solar energy that installs photovoltaic modules on floating platforms on natural or man-made water bodies. Unlike a ground-mounted plant, FPV responds continuously to wind, waves and water level variations, so it requires specific engineering for buoyancy, structure, anchoring and mooring. The result is the transformation of water surfaces into clean, renewable energy generation assets without occupying land.
What experience backs Isigenere and in which countries do you work?
General, Projects
Since 2008, Isigenere has developed more than 100 projects in 16 countries on 5 continents. Our first grid-connected FPV plant has been in continuous operation since 2009 in Agost (Spain) and is considered one of the first in the world.
Our reference projects include: Alqueva (EDP, Portugal), Europe’s largest floating solar plant on a reservoir, operating hybridized with a hydropower plant and storage; Cheylas (EDF, France), installed at a pumped-storage plant; Torrelaguna (Canal de Isabel II, Spain), a project on a drinking water tank; Pleasanton (USA), two plants on flooded quarries; and Seychelles (QAIR), in a sea bay. We have business development teams in Europe, the USA and Latin America.
What training and support do you offer during installation?
Services, Projects
At Isigenere we offer complete training (online and in person) for your installation team and provide clear, detailed materials, such as the Isifloating installation manual and demonstration videos accessible 24/7 during construction. The online training includes a knowledge validation test for site managers. In-person training takes place both at our facilities, with a visit to an operating plant and a drawing review with our technical team, and at the construction site before assembly begins. During construction we provide continuous remote support and, in the critical phases, on-site technical assistance from an Isigenere engineer.
What information do you need to design my project?
Services, Projects
The data we need for the Initial Feasibility Study (proposal stage) are your contact details and the GPS coordinates of the water body. For the detailed design we need a topographic and bathymetric survey in CAD, a hydrodynamic study (maximum, minimum and design water levels, waves and currents), a geotechnical study of the bottom, and the site’s wind and snow criteria. The studies required to determine the design are provided by the client or its technical team. When the calculation starts, we send you a data validation form to confirm each parameter.
Which photovoltaic modules are compatible?
Projects, Technology
The Isifloating system is designed for large-format modules, the most common in current projects, both monofacial and bifacial (for the latter we use specific clamps), and the Isifloating 6.0 version accepts larger modules. The modules are installed at a 5° tilt and allow north-south and east-west orientation without taking up more surface area. We verify the compatibility of your chosen module at the proposal stage.
Which standards and certifications do you apply in the Isifloating system calculations?
General, Technology
We calculate each Isifloating system in accordance with Eurocode (or equivalent standards where necessary), recommended marine practices and DNV guidelines for floating solar plants (DNV-RP-0584 and DNV JIPs), together with applicable local regulations. Our quality management system is certified to ISO 9001, with material traceability per project. The floats are suitable for contact with water intended for human consumption according to British and American standards, and the secondary floats carry the CE marking as maintenance walkways on solar platforms. In addition, our floating system has passed tests that we can provide on request.
What happens to the plant at the end of its service life?
Projects, Technology, General
The Isifloating system is also designed to make decommissioning easy. Since the platform is assembled in sub-areas and the floats are joined with bolted connectors, dismantling follows the same process in reverse: the sub-areas are brought to shore and dismantled on land, with no need for heavy machinery. The HDPE floats are 100% recyclable and the clamps are made of aluminum, which is also recyclable. In the oldest Isifloating installations, the removed floats have been recycled, generating income for the plant owners from their sale.
What services does Isigenere offer?
Services
Our services cover supporting you from the first analysis and throughout the asset’s service life, meeting your needs in four areas: engineering and consulting (water body analysis, system design, and bankability and permitting documentation); manufacturing and supply of the Isifloating floating solar system; installation training and support; and O&M and after-sales, with a maintenance manual, periodic inspections, ongoing technical support and due diligence documentation.
How much surface does a plant need, and is there a minimum or maximum size?
Projects, Technology
As a reference, a 1 MW plant in standard configuration covers about 6,000 m² of water surface with 650 Wp modules; the exact area depends on the module, the maintenance walkways and the geometry of the water body. There is no limit to total power: in large projects we divide the plant into independent islands, which also allow phased construction.
Can floating solar be installed on drinking water?
Projects, Applications
Yes. The floats are suitable for contact with water intended for human consumption in accordance with British and American standards. In Torrelaguna we designed and supplied for Canal de Isabel II a plant with 3,770 modules on a 12,000 m² drinking water tank, anchored to the tank walls and integrated with the existing hydropower generation. Partial coverage also helps conserve water by limiting evaporation and algae growth.
How is access to the plant controlled and the installation protected?
Projects, Technology
En Isigenere tenemos en cuenta el acceso a la planta FPV desde el diseño. En embalses, la planta suele situarse alejada de la orilla para acompañar las variaciones de nivel y se accede en embarcación, limitando los accesos no autorizados. En balsas, diseñamos una plataforma de acceso con flotadores secundarios. Proteger la instalación frente al impacto de elementos flotantes es una de las funciones de la pasarela perimetral que incluimos en nuestros diseños y del pantalán que instalamos en proyectos en embalses y con gran oleaje. La protección del recinto en tierra la defines tú o tu EPC (vallado, videovigilancia o control de accesos) y se integra en el diseño general de la planta.
Where are the inverters and transformers installed, and how does the cabling reach the shore?
Projects, Technology
The inverters can be installed on land (onshore) or on the plant. We adapt the cable routing on the plant to your electrical design. The secondary floats can include supports for cable trays and positions for string inverters or combiner boxes. Transformers can be installed on concrete pontoons on the water. To bring the power export cabling to shore we use buoys, flexible sections and conduits that follow the platform’s movement, or submarine cables when the project requires it.
Why are the modules installed at a 5° tilt?
Technology
The photovoltaic modules are installed at a 5° tilt, with the back closed by the float, because we prioritize the system’s stability and durability throughout its service life. This reduces wind load by 4.4 times compared with 12° systems with an open back. This means lower forces on the floats, connectors and the anchoring and mooring system. The 5° tilt also shortens shadows between rows, allows reduced row spacing (while keeping the space needed for maintenance) and therefore makes it possible to install more power on a given water surface. The cooling effect of the water is greater due to its proximity to the module and offsets the lower tilt (depending on the location). And 5° can even increase output in summer compared with higher-tilt solutions, which is especially useful for irrigation pumping.
Can it be installed on salt water, at sea, on rivers or on canals?
Aplicaciones, Tecnología
Isifloating technology is designed for inland water bodies and sheltered nearshore environments, including salt water. In 2021 we developed our first project on brackish water, and in 2026 our first nearshore project in the Seychelles (6 MW). Open sea, with storm waves above 3 meters, is outside its design scope. On rivers and canals with currents, the force of the water governs the structure and its anchoring, so we only study special cases such as large aquaculture channels.
No encontramos preguntas con esa búsqueda. Prueba con otras palabras o elige otra categoría.
